page_banner

PRODUCTS

High definition Laboratory Eyewash – Antifreeze eye washer (buried) – Bohua

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for Compound Eyewash Station, Large Pedal Compound Eyewash, Compound Eyewash Room, Encouraged with the fast producing current market on the speedy foodstuff and beverage consumables all around the entire world , We're hunting forward to functioning with partners/clients to create good results together.
High definition Laboratory Eyewash – Antifreeze eye washer (buried) – Bohua Detail:

Basic: BH30-6012

Advantage features: the water inlet and drainage device of the buried eye washer are installed below the permafrost. Open the valve and the tap water flows into the eye washer system from the underground water inlet. When the valve is closed, the system can automatically empty the water in the eye washer pipe. Applicable to the winter below 0 degrees of the area, the depth of the permafrost is greater than 500MM to use, really play the anti-freezing effect.

Patent number:ZL 2012 2 0337278.7 

Eyewash assembly:

304 castings are finished, in which the 90 degree bend pipe adopts seamless pipe, without weld, and the pipe wall will not burst due to water pressure when used.

Shower basin: diameter 260mm, thickness 0.6mm, 360 degrees rotation shower, no dead Angle

Full body coverage is large and meets and exceeds American standards (1524mm above ground level is required)

Height, the diameter of the shower to the diameter of 508mm), the flow of the shower to 120-180L/ min, fully meet the requirements of the American standard for the range of eye wash.

Eye wash device:

push the handle, the aerosol eye wash water will eject within 1 second, the height and Angle of the water will be designed according to the proportion of the face, the eye wash flow will ≧11.4L/min. The on-site water pressure should be 0.25-0.4MPa.

Both upper and lower adopts two-piece ball valve, superior to one-piece ball valve, large aperture, can meet the United States

Mark the flush flow rate of the eyewash. (Flushing flow ≥ 75.7L/min, eye-washing flow ≥ ≥

11.4L/min requirements, efficient and rapid flushing) requirements, efficient and rapid flushing. Eye washing filter: high density PP+304 double layer filter, can filter the impurities in the water, the water is aerosol, hug, mild.

BH30-6012C: From the basic model of single to double

31

BH32-6012: from the basic type of composite into vertical eye wash device

32


Product detail pictures:

High definition Laboratory Eyewash – Antifreeze eye washer (buried) – Bohua detail pictures

High definition Laboratory Eyewash – Antifreeze eye washer (buried) – Bohua detail pictures

High definition Laboratory Eyewash – Antifreeze eye washer (buried) – Bohua detail pictures


Related Product Guide:

Using a complete scientific high quality management program, superior high quality and superior faith, we acquire great reputation and occupied this industry for High definition Laboratory Eyewash – Antifreeze eye washer (buried) – Bohua , The product will supply to all over the world, such as: Slovenia, Gabon, Libya, By integrating manufacturing with foreign trade sectors, we can provide total customer solutions by guaranteeing the delivery of right products to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
  1. Frequently Asked Questions

    1. What is the delivery time?

    Lead time after receiving a 30% T/T deposit is 3-20 days. Samples will be prepared within 5 days.

    2. What payment methods do you accept?

    We accept T/T, L/C and Cash.

    3. What is the Minimum Order Quantity (MOQ)?

    Generally, the MOQ is 10 pieces, but we also provide samples for quality inspection.

    4. Do you charge for samples?

    As per our company policy, we charge for samples based on EXW price. The sample fee will be refunded with the next order.

    5. Can you produce according to customers’ designs?

    Yes, we offer custom eyewash stations tailored to your needs.

  • Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Agustin from Bahamas - 2017.09.16 13:44
    This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Maria from Rio de Janeiro - 2018.12.14 15:26
    Write your message here and send it to us