Good quality Compound Shower Eyewash - Compound shower eyewash – Bohua

Short Description:

Product Detail

FAQ

Product Tags

Feedback (2)

As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for 304 Stainless Steel Composite Eyewash, Emergency Eyewash Manufacturers, Chemical Industry Eyewash Manufacturer, We have been searching ahead to even better cooperation with overseas buyers dependant on mutual benefits. Be sure to really feel totally free to speak to us for additional element!

Good quality Compound Shower Eyewash - Compound shower eyewash – Bohua Detail:

Basic:BH30-1010

The compound eyewash device can open the eyewash part and the shower part separately, or open the eyewash and shower at the same time. The eyewash part and the shower are on the same side.

The Bohua eyewash assembly is a one-time casting molding with smooth surface, strong pressure resistance and long service life. There is no burst phenomenon in winter or high water pressure. Inferior quality always becomes welded parts. The workmanship is relatively rough and mostly welded, which not only affects the appearance but also shortens the service life. In cold areas or when the water pressure is high, it is easy to cause the expansion of the tube to burst.

Filter: The first layer of PP high-density filter to filter the larger particles in the water. The second layer uses a four-layer high-density 304 stainless steel grid staggered structure to further filter fine impurities, while dispersing the water flow, making the water bubble-like, and gently flushing the eyes to prevent impurities and strong water flow from causing secondary damage to the eyes

The shower head has a half-hole design on the edge, and the arc is tangent to the two smooth curves of R250 and R39 respectively, so that the shower water is scattered along the arc on the inner wall of the shower basin, exactly at a height of 1524mm, reaching a coverage of 508mm in diameter The range, fully meets the requirements of the American Standard for the shower range of the eyewash

The upper ball valve adopts a two-piece ball valve, which is better than a one-piece ball valve, with a large aperture, which can meet the American standard for the flushing flow of the eyewash. (Flush flow ≧75.7L/min, eyewash flow ≧ 11.4L/min requirements, effective and rapid flushing), effective and rapid flushing.

BH30-1010: Basic model

BH30-1010wwwwwwww

BH30-1011: Yellow ABS spray

BH30-1011L: Green ABS spray

BH30-1011Green ABS spray

BH30-1011: Yellow ABS spray + explosion-proof box + sound and light alarm

BH30-10llow ABS spray + explosion-proof box + sound and light alarm

BH30-2011: Yellow ABS spray + ABS yellow linkage flip cover

BH30-201low ABS spray + ABS yellow linkage flip cover

BH30-1012zp: Push with both hands + automatic emptying (the assembly contains an emptying valve)

BH30-1316: 316 material

BH30-1316

BH30-2010: White ABS linkage clamshell

BH30-2010

BH30-1111: Polishing inside and outside (food grade pipes)

BH30-1111

BH30-1010T: Single port eyewash

BH30-1018: Changed from basic threaded connection to snap-on connection

BH30-1018

BH30-2012: 304 stainless steel linkage clamshell

20160906112908_5312

Product detail pictures:

Related Product Guide:

Our products are greatly acknowledged and reliable by users and may fulfill repeatedly shifting financial and social wants for Good quality Compound Shower Eyewash - Compound shower eyewash – Bohua , The product will supply to all over the world, such as: Madagascar, Canada, Surabaya, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.

Frequently Asked Questions

1. What is the delivery time?

Lead time after receiving a 30% T/T deposit is 3-20 days. Samples will be prepared within 5 days.

2. What payment methods do you accept?

We accept T/T, L/C and Cash.

3. What is the Minimum Order Quantity (MOQ)?

Generally, the MOQ is 10 pieces, but we also provide samples for quality inspection.

4. Do you charge for samples?

As per our company policy, we charge for samples based on EXW price. The sample fee will be refunded with the next order.

5. Can you produce according to customers’ designs?

Yes, we offer custom eyewash stations tailored to your needs.