Factory Cheap Hot Electric Heat Tracing Shower Eyewash - Electric heat tracing eye washer – Bohua

Basic: BH30-1062

Electric heat wash device is suitable for the north 0 degrees below the use of the area. It is also suitable for use in areas where the temperature is higher than -45℃. The power of electric tracing belt is 6 M *48W/M. Automatic thermostatic control for the companion zone. There is a temperature controller to control the heating power of the heating belt to ensure the water temperature. Explosion-proof level: ExdIICT4, IP65 protection. The power supply junction box of electric tracing belt is arranged separately from the temperature control junction box. The thickness of the tropical insulation layer is 30MM, and the insulation material is flame retardant rubber. Voltage: AC220V/1PH/ 50Hz.

Eyewash shell:

green ABS resistant to high temperature of 200 degrees, detachable structure, convenient for later maintenance.

Water inlet and outlet of eye washer:

HG/T20615 flange connection. Connection sizes are 1-1/2 DN40.

Eyewash elbow tee are national standard parts, never clogged.

Up and down are equipped with 2 pieces of ball valve, can protect 20,000 times of water leakage. At the end of use, close the ball valve and drain the water inside the elbow of the eyewash, ensuring that it is completely drained within 12 minutes.

Eyewash horn bay for bilateral adjustable, as you want to adjust the size of the water flow.

Connect to drinking tap water. The water pressure is 0.25MPa

Spray water flow: ≥120L/MIN

Eyewash/face water flow ≥12L/MIN

Flushing time ≥15 minutes.

BH30-1062C: from the basic yellow to orange, while the shower basin and eye basin upgrade to copper plated parts

BH30-1062T: Double mouth eye wash device becomes single mouth eye wash device

BH30-1062L: From the yellow of the basic model to green

0206-1062: Housing upgraded to stainless steel housing

BH30-1062(vertical): from the basic type of composite into vertical eyewash, the cancellation of the shower part