page_banner

PRODUCTS

Excellent quality Laboratory Bench Eyewash - Antifreeze eye washer (buried) – Bohua

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

To create much more benefit for consumers is our company philosophy; customer growing is our working chase for 316 Electric Heat Tracing Eyewash, Draining Eyewash, Superior Eyewash Manufacturer, We sincerely welcome both equally international and domestic company associates, and hope to work along with you during the in close proximity to foreseeable future!
Excellent quality Laboratory Bench Eyewash - Antifreeze eye washer (buried) – Bohua Detail:

Basic: BH30-6012

Advantage features: the water inlet and drainage device of the buried eye washer are installed below the permafrost. Open the valve and the tap water flows into the eye washer system from the underground water inlet. When the valve is closed, the system can automatically empty the water in the eye washer pipe. Applicable to the winter below 0 degrees of the area, the depth of the permafrost is greater than 500MM to use, really play the anti-freezing effect.

Patent number:ZL 2012 2 0337278.7 

Eyewash assembly:

304 castings are finished, in which the 90 degree bend pipe adopts seamless pipe, without weld, and the pipe wall will not burst due to water pressure when used.

Shower basin: diameter 260mm, thickness 0.6mm, 360 degrees rotation shower, no dead Angle

Full body coverage is large and meets and exceeds American standards (1524mm above ground level is required)

Height, the diameter of the shower to the diameter of 508mm), the flow of the shower to 120-180L/ min, fully meet the requirements of the American standard for the range of eye wash.

Eye wash device:

push the handle, the aerosol eye wash water will eject within 1 second, the height and Angle of the water will be designed according to the proportion of the face, the eye wash flow will ≧11.4L/min. The on-site water pressure should be 0.25-0.4MPa.

Both upper and lower adopts two-piece ball valve, superior to one-piece ball valve, large aperture, can meet the United States

Mark the flush flow rate of the eyewash. (Flushing flow ≥ 75.7L/min, eye-washing flow ≥ ≥

11.4L/min requirements, efficient and rapid flushing) requirements, efficient and rapid flushing. Eye washing filter: high density PP+304 double layer filter, can filter the impurities in the water, the water is aerosol, hug, mild.

BH30-6012C: From the basic model of single to double

31

BH32-6012: from the basic type of composite into vertical eye wash device

32


Product detail pictures:

Excellent quality Laboratory Bench Eyewash - Antifreeze eye washer (buried) – Bohua detail pictures

Excellent quality Laboratory Bench Eyewash - Antifreeze eye washer (buried) – Bohua detail pictures

Excellent quality Laboratory Bench Eyewash - Antifreeze eye washer (buried) – Bohua detail pictures


Related Product Guide:

We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Excellent quality Laboratory Bench Eyewash - Antifreeze eye washer (buried) – Bohua , The product will supply to all over the world, such as: Czech republic, Florida, Saudi Arabia, The company attaches great importance to product quality and service quality, based on the business philosophy "good with people, genuine to whole world, your satisfaction is our pursuit". we design products, According to customer's sample and requirements, to meet the needs of the market and offer different customers with personalized service. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development!
  1. Frequently Asked Questions

    1. What is the delivery time?

    Lead time after receiving a 30% T/T deposit is 3-20 days. Samples will be prepared within 5 days.

    2. What payment methods do you accept?

    We accept T/T, L/C and Cash.

    3. What is the Minimum Order Quantity (MOQ)?

    Generally, the MOQ is 10 pieces, but we also provide samples for quality inspection.

    4. Do you charge for samples?

    As per our company policy, we charge for samples based on EXW price. The sample fee will be refunded with the next order.

    5. Can you produce according to customers’ designs?

    Yes, we offer custom eyewash stations tailored to your needs.

  • Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By Moira from Costa Rica - 2018.10.09 19:07
    Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
    5 Stars By Betsy from Lithuania - 2017.02.18 15:54
    Write your message here and send it to us