China wholesale Antifreeze Eyewash - Antifreeze eye washer (buried) – Bohua

Basic: BH30-6012

Advantage features: the water inlet and drainage device of the buried eye washer are installed below the permafrost. Open the valve and the tap water flows into the eye washer system from the underground water inlet. When the valve is closed, the system can automatically empty the water in the eye washer pipe. Applicable to the winter below 0 degrees of the area, the depth of the permafrost is greater than 500MM to use, really play the anti-freezing effect.

Patent number:ZL 2012 2 0337278.7 

Eyewash assembly:

304 castings are finished, in which the 90 degree bend pipe adopts seamless pipe, without weld, and the pipe wall will not burst due to water pressure when used.

Shower basin: diameter 260mm, thickness 0.6mm, 360 degrees rotation shower, no dead Angle

Full body coverage is large and meets and exceeds American standards (1524mm above ground level is required)

Height, the diameter of the shower to the diameter of 508mm), the flow of the shower to 120-180L/ min, fully meet the requirements of the American standard for the range of eye wash.

Eye wash device:

push the handle, the aerosol eye wash water will eject within 1 second, the height and Angle of the water will be designed according to the proportion of the face, the eye wash flow will ≧11.4L/min. The on-site water pressure should be 0.25-0.4MPa.

Both upper and lower adopts two-piece ball valve, superior to one-piece ball valve, large aperture, can meet the United States

Mark the flush flow rate of the eyewash. (Flushing flow ≥ 75.7L/min, eye-washing flow ≥ ≥

11.4L/min requirements, efficient and rapid flushing) requirements, efficient and rapid flushing. Eye washing filter: high density PP+304 double layer filter, can filter the impurities in the water, the water is aerosol, hug, mild.

BH30-6012C: From the basic model of single to double

BH32-6012: from the basic type of composite into vertical eye wash device

1. Frequently Asked Questions

   1. What is the delivery time?

   Lead time after receiving a 30% T/T deposit is 3-20 days. Samples will be prepared within 5 days.

   2. What payment methods do you accept?

   We accept T/T, L/C and Cash.

   3. What is the Minimum Order Quantity (MOQ)?

   Generally, the MOQ is 10 pieces, but we also provide samples for quality inspection.

   4. Do you charge for samples?

   As per our company policy, we charge for samples based on EXW price. The sample fee will be refunded with the next order.

   5. Can you produce according to customers’ designs?

   Yes, we offer custom eyewash stations tailored to your needs.