2020 China New Design Emergency Electric Heat Tracing Eye Wash - Electric heating eye washer – Bohua

Basic: BH36-1062B

Electric heating eye wash device is based on electric heat tracing eye wash device, suitable for use in areas with temperature below 0 degrees, can effectively improve the water temperature of eye wash about 15 degrees.

The eyewash itself has the function of heat tracing, insulation and antifreeze, so that the water temperature of the eyewash system is kept at a constant temperature. Heating device: imported constant temperature electric tracing belt is adopted and equipped with automatic temperature control system to control the heating temperature. Insulation layer: environment-friendly rubber material. Cover: warning yellow ABS material, resistant to corrosion by various chemicals.

Patent number: ZL 2012 2 0337303.1.

Material:

main body 304 stainless steel, pipe fitting interface GB thread.

Shower:

pull down the pull rod, the shower water will be ejected from the shower basin in 1 second, the flow of the shower is 120-180 litres adjustable. The working pressure is 0.25-0.4MPa.

Eyewash device:

working pressure 0.25-0.6Mpa. Push the handle, and the aerosol eye wash will be ejection within 1 second. The height and Angle of the water will be designed according to the proportion of the human face. The eye wash flow can be adjusted from 12-18L/min.

Heating device:

electric heating device is equipped with temperature control switch or automatic system to control the heating temperature or start the switch. High power heater power: 10KW, or design power according to demand. 

Insulation layer:

environment-friendly rubber material. Cover: warning yellow ABS material, resistant to corrosion by various chemicals.

Voltage and current: AC380V voltage, 25A current. 

Explosion rating:
Exd II BT4. (can be configured according to requirements) Protection grade: IP65. (Can be configured according to requirements)

BH32-1062B: from the basic composite into vertical, the cancellation of the shower part.

BH36-1066: The electric heat tracing part of the basic model has been removed, and there is no ABS coating

BH32-1066 (vertical) : from the basic type of composite into vertical, cancel the washing part. At the same time, the electric heat tracing part of the basic model is cancelled, and there is no ABS coating