100% Original Compound Spray Eyewash - Compound shower eyewash – Bohua

Basic:BH30-1010

The compound eyewash device can open the eyewash part and the shower part separately, or open the eyewash and shower at the same time. The eyewash part and the shower are on the same side.

The Bohua eyewash assembly is a one-time casting molding with smooth surface, strong pressure resistance and long service life. There is no burst phenomenon in winter or high water pressure. Inferior quality always becomes welded parts. The workmanship is relatively rough and mostly welded, which not only affects the appearance but also shortens the service life. In cold areas or when the water pressure is high, it is easy to cause the expansion of the tube to burst.

Filter: The first layer of PP high-density filter to filter the larger particles in the water. The second layer uses a four-layer high-density 304 stainless steel grid staggered structure to further filter fine impurities, while dispersing the water flow, making the water bubble-like, and gently flushing the eyes to prevent impurities and strong water flow from causing secondary damage to the eyes

The shower head has a half-hole design on the edge, and the arc is tangent to the two smooth curves of R250 and R39 respectively, so that the shower water is scattered along the arc on the inner wall of the shower basin, exactly at a height of 1524mm, reaching a coverage of 508mm in diameter The range, fully meets the requirements of the American Standard for the shower range of the eyewash

The upper ball valve adopts a two-piece ball valve, which is better than a one-piece ball valve, with a large aperture, which can meet the American standard for the flushing flow of the eyewash. (Flush flow ≧75.7L/min, eyewash flow ≧ 11.4L/min requirements, effective and rapid flushing), effective and rapid flushing.

BH30-1010: Basic model

BH30-1011: Yellow ABS spray

BH30-1011L: Green ABS spray

BH30-1011: Yellow ABS spray + explosion-proof box + sound and light alarm

BH30-2011: Yellow ABS spray + ABS yellow linkage flip cover

BH30-1012zp: Push with both hands + automatic emptying (the assembly contains an emptying valve)

BH30-1316: 316 material

BH30-2010: White ABS linkage clamshell

BH30-1111: Polishing inside and outside (food grade pipes)

BH30-1010T: Single port eyewash

BH30-1018: Changed from basic threaded connection to snap-on connection

BH30-2012: 304 stainless steel linkage clamshell